Home  >  iBond® Product  >  Architecture&Construction  >  iBond® PVDF


Color card of the product

Fluorocarbon coating

Fluorocarbon Aluminum composite panel is made with fluorine enyne as the basic monomer, mixed with fluorocarbon resin, paint, alcohol ester solvent and accessory ingredients. The molecular structure in the coating becomes compact after being high baked to create a filmwhich has extra strong weather resistance../to create an extra weather resistant film. 
The fluorocarbon coating falls into conventional fluorocarbon coating or nano fluorocarbon coating according to the structure of film formation on the surface.
A.Conventional fluorocarbon is made of KYNAR500 fluorocarbon and is solidified to create the film on the surface after three coats and three bakes. It is acid and alkali resistant, standing the test of severe environment, and has no abnormal depigmentation for 15 to 20 years. It is more suitable for exterior decoration of architectures and curtain wall decoration of major constructional projects that have high demand for weather resistance.

B.Nano fluorocarbon is made of matured fluorocarbon surface processed with an additional coating of stain resistant layer added with nano materials. The coating after film formation has an extra low surface tension, which is stain resistant and can clean its surface coating simply by natural rain washing.

Raw Material Product Specifications
Base material of aluminum panel: high strength aluminum coils

PE core: non-toxic low density polyethylene

Surface coating:fluorocarbon coating

Thickness: 3-6mm; 4mm is recommended
Width: 1000-2000mm; 1220mm, 1250mm and 1500mm are recommended
Length: Maximum is up to 5800mm, 2440mm,3050mm and 4050mm are recommended
Thickness of aluminum sheet: 0.3-0.5mm
COPYRIGHT © 2024 Pivot Material All rights reserved.